0~ (50-5000) a Split Core Hall Effect Current Sensor Easy Installation

• Customization: Available
• Type: Hall Type
• Output Signal Type: Analog Output
• Model NO.: AHKC-EKA
• Certification: CE
• Customized: Customized
• Input: AC/DC 0-(50-100)a
• Output: DC 5V/4V
• Aperture: 20mm
• Power Supply: DC 15V
• Transport Package: Carton
• Trademark: Acrel
• Origin: China
• Production Capacity: 2000PCS/Day
• Package Size: 17.00cm * 10.00cm * 10.00cm
• Package Gross Weight: 0.500kg

Product Description

ACREL AHKC-EKA SPLIT CORE HALL EFFECT CURRENT SENSOR

Rated current input: 0~(50-5000)A

Rated output: 5V / 4V / 4-20mA

Aperture: 20mm/40mm/55mm/etc

Power supply: ±15V / 12V / 24V

 Small package size

 Low power consumption

 Extended measuring range

Split Type; Easy installation

Acrel AHKC series hall effect current sensor is mainly suitable for the isolation conversion of complex signals such as AC, DC, and pulse. Through the Hall effect principle, the converted signal can be directly collected and accepted by various acquisition devices such as AD, DSP, PLC, and secondary instruments, fast response time, wide current measurement range, high precision, strong overload capacity, good linearity, and strong anti-interference ability.

Product Parameters

Type	Rated current	Rated output	Measuring Aperture	Power Supply
AHKC-EKA	0-(50-500)A	5V/4V	Φ20mm	±15V
AHKC-EKAA	DC 0-(50-500)A	DC4-20mA	Φ20mm	12V/24V
AHKC-EKDA	AC 0-(50-500)A	DC4-20mA	Φ20mm	12V/24V
AHKC-EKB	0-(200-1000)A	5V/4V	Φ40mm	±15V
AHKC-EKBA	DC 0-(200-1000)A	DC4-20mA	Φ40mm	12V/24V
AHKC-EKBDA	AC 0-(200-1000)A	DC4-20mA	Φ40mm	12V/24V
AHKC-EKC	0-(500-1500)A	5V/4V	Φ55mm	±15V
AHKC-EKCA	DC 0-(500-1500)A	DC4-20mA	Φ55mm	12V/24V
AHKC-EKCDA	AC 0-(500-1500)A	DC4-20mA	Φ55mm	12V/24V
AHKC-K	0-(400-2000)A	5V/4V	64*16mm	±15V
AHKC-KAA	DC 0-(400-2000)A	DC4-20mA	64*16mm	12V/24V
AHKC-KDA	AC 0-(400-2000)A	DC4-20mA	64*16mm	12V/24V
AHKC-H	0-(500-3000)A	5V/4V	82*32	±15V
AHKC-KA	0-(500-5000)A	5V/4V	104*36	±15V
AHKC-HB	0-(2000-8000)A	5V/4V	132*52	±15V
	0-(10000-20000)A	5V/4V	132*52	±15V
	0-(25000-40000)A	5V/4V	132*52	±15V
AHKC-HBAA	DC 0-(2000-8000)A	DC4-20mA	132*52	12V/24V
	DC 0-(10000-20000)A	DC4-20mA	132*52	12V/24V
	DC 0-(25000-40000)A	DC4-20mA	132*52	12V/24V
AHKC-HBDA	AC 0-(2000-8000)A	DC4-20mA	132*52	12V/24V
	AC 0-(10000-20000)A	DC4-20mA	132*52	12V/24V
	AC 0-(25000-40000)A	DC4-20mA	132*52	12V/24V

 

Dimension

Installation Instructions

 

 

 

Certifications

 

Precautions of AHKC-EKA Split Core Hall Effect Current Sensor

 

• When the Hall sensor is used, attention must be paid to the coupling between the primary side coil and assistant side coil in order to get better dynamic characteristics and sensitivity, single conductor that should cram the thread hole of Hall sensor module completely is proposed to use.

• When the Hall sensor is used, the best measuring accuracy can be got under rated input current value. When the measured current is much less than the rated value, the primary side can use multi-turns if want to obtain the best accuracy, that is IpNp=rated ampere-turns. In addition, the temperature of the primary side feeder line cannot be more than 80ºC.

• When the Hall current sensor is working normally, the auxiliary power supply cannot be more than ±20% of calibration value.

• The Hall Current sensor is strictly prohibited to be fallen from high place (≥1m) during installation and use.

• Zero and full scale regulator potentiometer can not be adjusted.

• Auxiliary power supply is required to be deployed voluntarily.

• Power positive and negative poles cannot be inversely connected.  

  Company Profile