Amc96L-E4 Multifunction 3 Phase Power Meter for Telecom Tower

• Customization: Available
• Communication: RS485 (Modbus-RTU)
• Rated Current: AC 1A, 5A
• Model NO.: AMC96L-E4
• Accuracy: Active Energy: Class 0.5
• Frequency: 45-65Hz
• Auxiliary Power Supply: AC/DC 85~265V
• Transport Package: Carton
• Trademark: Acrel
• Origin: China
• Production Capacity: 200000 PCS/Yaer
• Package Size: 17.00cm * 15.00cm * 13.00cm
• Package Gross Weight: 0.500kg

Product Description

Product Description

AMC96L-E4/KC

True RMS Measurements

THD with 2-31st Harmonics

Max/Min Log with Timestamp

Internal Optional 4DI&2DO or 2DI&2DO&2AO

Standard one Energy Pulse Output

AMC96L-E4/KC 3 phase multi-function power meter adopts high-brightness LED/LCD display interface, and realizes parameter setting and control through buttons, which is very suitable for real-time power monitoring system. It can directly replace conventional power transmitters and measuring instruments. As an intelligent and digital front-end acquisition component, the instrument has been widely used in various control systems, SCADA systems and energy management systems.

Product Parameters

Function	Description&Value
Measurement	Three-phase AC kWh, kVarh, Active Power, Reactive Power, Forward&Reverse Power, Current, Voltage, Zero Sequence Voltage, Zero sequence Current, Voltage-phase Angle, Voltage&Current Unbalance, Power Factor, Harmonic, Frequency
Display	LCD display
Communication(Optional)	RS485,Modbus-RTU protocol;(1 start bit,8 data bit,1 stop bit,no parity) Baud Rate 1200~38400 bps etc.
Alarm Output(Optional)	1 channel passive relay,contact capacity 3A/30VDC,3A/250VAC, Used for high, low, unbalanced alarms, etc.
Analog Output(Optional)	1~5V DC or 4~20mA DC
DI/DO Switching(Optional)	DI (Digital input): 2-channel or 4-channel dry contact digital input with built-in power supply DO (Digital output): 2-channel digital output with NO relay contact. Capacity: 3A/30V DC,3A/250V AC

 

Parameter	Description&Value
Input	Rated Voltage	AC Voltage Input: 400V or 660V AC L-L (via direct connetion); 100V AC L-L (via -/100V AC PTs)
	Rated Current	AC Current Input: 5A AC or 1A AC (via -/5A AC or -/1A AC CTs)
	Overload	Current&Voltage input overload:1.2 times rated value(continuous); 10 times rated value /1 second
	Frequency	45~65Hz
	Power Consumption	The power consumption of each current&voltage input circuit is less than 0.5VA
Measuring Accuracy	Voltage	0.2%
	Current	0.2%
	Active Power	0.5%
	Reactive Power	1.0%
	kWh	0.5%
	kart	1.0%
	Frequency	±0.05Hz
	Harmonic	±1%
Power Supply	Voltage Range	85-265V AC/DC; 24V or 48V DC (±20%)
	Power Consumption	≤10VA
Insulation resistance		≥ 100MΩ
Power frequency withstands voltage		Between Power supply//Switching Output// Current Input//voltage Input and Transmitting// Communication //Pulse Output//switching input AC 2 kV 1min; Between Power supply,switching output,Current Input,voltage Input AC 2 kV 1min; Between Transmitting,Communication,Pulse Output,switching input AC 1kV 1 min;

Front Panel

LCD Display

Features of AMC96L-E4 3 Phase Multifunction Power Meter

1. It has RS485 communication interface, and adopts MODBUS-RTU protocol to meet the needs of communication network management;

2. The 4-20mA analog output can correspond to the measured electrical parameters and meet the interface requirements such as DCS;

3. With switch input and relay output, the function of "remote signal" and "remote control" of circuit breaker switch can be realized.

Wiring

Network

 

Installation

 

 

Company Profile