| Output Signal Type: | Analog Output |
|---|---|
| Accuracy Grade: | 0.2G |
| IP Rating: | IP20 |
| Samples: |
|---|
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier 
Model: BM200-DI/I
Input Signal: DC0~20mA / 4~20mA
Output Signal: DC0~20mA / 4~20mA
Channel Type: 1 in 1 out, 1 in 2 out, 2 in 2 out
Power Supply: DC20~35V
35mm Din Rail Installation
BM200 isolated safety barrier can transmit signals between the safe area and the dangerous area, and limit the energy transfer from the safe area to the dangerous area caused by the fault. The voltage, current, temperature, resistance signals generated by the equipment (transmitter) on the dangerous side are isolated and converted into corresponding linear voltage and current signals outputting to the safe area.
The product requires independent power supply, and the input/output/power supply is isolated. It can be used in current source, two-wire, three-wire transmitter equipment.
| Technical parameters | Index | |
| Input | Range | DC 0~5V or DC 4-20mA |
| Impedance | 0.01Ω | |
| Max.input | 1.2 times continuously;10 times for 1s transiently | |
| Output | Range | DC4-20mA or 0-20mA |
| Load | ≤500Ω | |
| Zero adjustment | 5% | |
| Span adjustment | 5% | |
| Protection | Short circuit protection | |
| Power supply | Range |
8.5-40V DC,normally 24VDC/2W |
| Max.current | 24mA | |
| Other | Accuracy/linearity | Max.0.5%of full span |
| Temperature effect | ≤200ppm/ºC | |
| Response time | ≤400ms | |
| Isolation voltage | 2kV between input and output | |
| Operating/storage temperature | -10ºC~+55ºC/-25~+70ºC | |
BM200-DI/I-B11
BM200-DI/I-C12
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}