Output Signal Type: | Analog Output |
---|---|
Accuracy Grade: | 0.2G |
IP Rating: | IP20 |
Samples: |
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: |
![]() ![]() ![]() ![]() ![]() ![]() ![]() |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
Model: BM200-DI/I
Input Signal: DC0~20mA / 4~20mA
Output Signal: DC0~20mA / 4~20mA
Channel Type: 1 in 1 out, 1 in 2 out, 2 in 2 out
Power Supply: DC20~35V
35mm Din Rail Installation
BM200 isolated safety barrier can transmit signals between the safe area and the dangerous area, and limit the energy transfer from the safe area to the dangerous area caused by the fault. The voltage, current, temperature, resistance signals generated by the equipment (transmitter) on the dangerous side are isolated and converted into corresponding linear voltage and current signals outputting to the safe area. The product requires independent power supply, and the input/output/power supply is isolated. It can be used in current source, two-wire, three-wire transmitter equipment.
Type |
BM200-DI/I-B11,BM200-DI/I-C12,BM200-DI/I-C22 |
Channel type |
1 in 1 out, 1 in 2 out, 2 in 2 out |
Input type |
Current |
Output signal |
0~20mA/4~20mA (Distribution voltage: 14.0V/20mA) |
Output Signal |
0~20mA /4~20mA (safety side output); Load resistance: ≤550Ω |
Transmission accuracy |
0.2% |
Temperature drift |
50ppm |
Response time |
5ms to reach 90% of final value |
Supply voltage |
20~35V DC |
Consumption |
24V power supply, 20mA output: ≤70mA (one in, one out) ≤110mA (one in, two out) ≤160mA (two in and two out) |
Working temperature |
-20ºC~+60ºC |
Storage temperature |
-40ºC~+80ºC |
Relative humidity |
≤95%RH, no condensation, no corrosive gas place |
Altitude |
≤2500m |
Protection level |
IP20 |
Weight |
About 110g (12.5mm shell) About 150g (22.5mm shell) |
Installation |
Din-rail mounted |
Dielectric strength |
Intrinsically safe end and non-intrinsically safe end ≥ 2500V AC; power supply and non-intrinsically safe end ≥ 500V AC |
BM200-DI/I-B11
BM200-DI/I-C12
Suppliers with verified business licenses