Split Core Hall Effect Current Sensor 0- (50-500) a 5V/4V 20mm

• Type: Hall Type
• Output Signal Type: Analog Output
• Accuracy Grade: 1.0G
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: AHKC-EKA
• Certification: CE
• Customized: Customized
• Input: AC/DC 0-(50-100)a
• Output: DC 5V/4V
• Aperture: 20mm
• Power Supply: DC 15V
• Transport Package: Carton
• Trademark: Acrel
• Origin: China
• Production Capacity: 2000PCS/Day
• Package Size: 17.00cm * 10.00cm * 10.00cm
• Package Gross Weight: 0.500kg

Product Description

ACREL AHKC-EKA SPLIT CORE HALL SENSOR

Product Description

 

AHKC-EKA series open-type Hall current sensor is a new generation of current sensor developed by applying the principle of Hall effect. It can measure DC, AC, pulse and various irregular waveform currents under electrical isolation conditions. It is suitable for isolation and conversion of complex signals such as AC, DC, and pulse. Through the principle of Hall effect, the converted signal can be directly collected and accepted by various acquisition devices such as AD, DSP, PLC, and secondary instruments.

Open-loop hall sensor

Accuracy class: 1

Application:
  ♦ Industrial control
  ♦ Energy and automation
  ♦ AC variable speed drives
  ♦ Battery supplied applications
  ♦ Uniterruptable power supplies

 

Features

 

Product Parameters

Type	Rated current	Rated output	Measuring Aperture	Power Supply
AHKC-EKA	0-(50-500)A	5V/4V	Φ20mm	±15V
AHKC-EKAA	DC 0-(50-500)A	DC4-20mA	Φ20mm	12V/24V
AHKC-EKDA	AC 0-(50-500)A	DC4-20mA	Φ20mm	12V/24V
AHKC-EKB	0-(200-1000)A	5V/4V	Φ40mm	±15V
AHKC-EKBA	DC 0-(200-1000)A	DC4-20mA	Φ40mm	12V/24V
AHKC-EKBDA	AC 0-(200-1000)A	DC4-20mA	Φ40mm	12V/24V
AHKC-EKC	0-(500-1500)A	5V/4V	Φ55mm	±15V
AHKC-EKCA	DC 0-(500-1500)A	DC4-20mA	Φ55mm	12V/24V
AHKC-EKCDA	AC 0-(500-1500)A	DC4-20mA	Φ55mm	12V/24V
AHKC-K	0-(400-2000)A	5V/4V	64*16mm	±15V
AHKC-KAA	DC 0-(400-2000)A	DC4-20mA	64*16mm	12V/24V
AHKC-KDA	AC 0-(400-2000)A	DC4-20mA	64*16mm	12V/24V
AHKC-H	0-(500-3000)A	5V/4V	82*32	±15V
AHKC-KA	0-(500-5000)A	5V/4V	104*36	±15V
AHKC-HB	0-(2000-8000)A	5V/4V	132*52	±15V
	0-(10000-20000)A	5V/4V	132*52	±15V
	0-(25000-40000)A	5V/4V	132*52	±15V
AHKC-HBAA	DC 0-(2000-8000)A	DC4-20mA	132*52	12V/24V
	DC 0-(10000-20000)A	DC4-20mA	132*52	12V/24V
	DC 0-(25000-40000)A	DC4-20mA	132*52	12V/24V
AHKC-HBDA	AC 0-(2000-8000)A	DC4-20mA	132*52	12V/24V
	AC 0-(10000-20000)A	DC4-20mA	132*52	12V/24V
	AC 0-(25000-40000)A	DC4-20mA	132*52	12V/24V

 

Dimension

Wiring

 

Notes:
1. When the hall sensor is used, in order to obtain better dynamic characteristics and sensitivity, attention must be paid to the coupling between the primary side coil and the secondary side coil. It is recommended to use a single wire and the wire completely fills the hall sensor module wire hole;
2. When the hall sensor is used, the best measurement accuracy can be obtained under the rated input current value. When the measured current is far lower than the rated current To obtain the best accuracy, multiple turns can be used for the primary side, i.e. IPNP = rated ampere turns. In addition, the temperature of the primary side feeder shall not exceed 80 ºC;
3. The auxiliary power supply of Hall current sensor shall not exceed ± 20% of the calibrated value when it works normally;
4.Hall current sensor shall not fall from a high place (≥ 1m) during installation and use;
5. It is unable to adjust the zero point and full degree adjustment potentiometer;
6. Auxiliary power supply needs to be configured by itself;
7. The positive and negative poles of the power supply cannot be reversed.

Certifications

Company Profile