Rpp Power Distribution Monitoring for Rack-Level Power Infrastructure

Product Description

RPP Power Distribution Monitoring solution for Data Center

 

  · RPP Power Distribution Monitoring
Centralized electrical monitoring for remote power panels in data centers.

· Data Center Power Distribution Monitoring
Precision monitoring of critical power distribution infrastructure.

· RPP Branch Circuit Monitoring
Individual branch circuit measurement for detailed load visibility.

· Multi Circuit Power Distribution Monitoring
Centralized monitoring of up to 192 outgoing circuits.

· Dual Feed RPP Power Monitoring
Independent monitoring of A and B power distribution inputs.

· Intelligent RPP Energy Monitoring
Accurate measurement of voltage, current, power and energy consumption.

· Real Time Power Distribution Monitoring
Continuous monitoring of electrical parameters and circuit operating conditions.

· RPP Power Quality Monitoring
Harmonic and electrical unbalance analysis for AC power distribution.

· RPP Alarm and Circuit Status Monitoring
Configurable alarm thresholds and breaker status monitoring.

· Integrated Power Distribution Management
RS485 Modbus RTU communication for centralized monitoring systems.

Wiring

 

 

 

Application

Main Circuit Monitoring
· Voltage, current, power and energy

Branch Circuit Monitoring
· Multi-circuit load and energy measurement

AMC Monitoring Device
· Centralized electrical data collection

RS485 Communication
· Modbus RTU data transmission

Gateway or Touchscreen
· Local display and protocol conversion

Monitoring Platform
· Remote monitoring, alarms and analysis

 

Project
 

 

The project is located in Datong city, Shanxi Province

Party A: ByteDance

It covers an area of 537.1 mu

10 data center buildings, 2 complex buildings, 1110 kV substation, 1220kV substation

It can accommodate 600,000 high-performance servers

Construction of the D1~D4 data center building has been started

 

 

Parameters

Product Model

 

Model	Function Description
AMC100-ZA	Monitoring the full power parameters of the A+B dual three-phase AC incoming circuit, 8 switching status inputs, 4 switching status outputs, 2 leakage monitoring, 1 temperature and humidity detection, 3 RS485 communications
AMC100-FAK30	Monitor the full power parameters and switch status of a total of 30 branches of A+B dual AC outlets, and 1 RS485 communication
AMC100-FAK48	Monitor the full power parameters and switch status of a total of 48 branches of A+B dual AC outlets, and 1 RS485 communication
AMC100-FA30	Monitor the full power parameters of a total of 30 branches of A+B dual AC outlets, and 1 RS485 communication
AMC100-FA48	Monitor the full power parameters of a total of 48 branches of A+B dual AC outlets, and 1 RS485 communication
AMC100-KA30	Wet contact, monitor the  switching status of  30 branches A+B, 1 RS485 communication
AMC100-KA48	Wet contact, monitor the  switching status of  48 branches A+B, 1 RS485 communication
AMC100-KD30	Dry contact, monitor the  switching status of  30 branches A+B, 1 RS485 communication
AMC100-KD48	Dry contact, monitor the  switching status of  48 branches A+B, 1 RS485 communication
AMC100-FT30	1 way RS485 communication, 30 way temperature measurement
AMC100-FT48	1 way RS485 communication, 48 way temperature measurement

Model	Functional   Description
AMC100-ZD	Monitors the voltage, current, power, and electric energy of  2 independent incoming lines A+B,8 switching input, 4 switching output , 1 temperature and humidity detection, and 3  RS485 communications
AMC100-FDK30	Monitor the full power parameters and switching status (active) of A+B dual DC outlet 30 branches ,and 1 RS485 communication
AMC100-FDK48	Monitor the full power parameters and switching status (active) of A+B dual DC outlet 48 branches, and 1 RS485 communication
AMC100-FD30	Monitor the full power parameters of A+B dual DC outgoing lines in A total of 30 branches, and 1 RS485 communication
AMC100-FD48	Monitor the full power parameters of A+B dual DC outgoing lines in A total of 48 branches, and 1 RS485 communication
AMC100-KA30	Wet contact, Monitor the switching status of 30 branches A+B, and 1 RS485 communication
AMC100-KA48	Wet contact, Monitor the switching status of 48 branches A+B, and 1 RS485 communication
AMC100-KD30	Dry contact: Monitor the switching status of 30 branches A+B, and 1 RS485 communication
AMC100-KD48	Dry contact: Monitor the switching status of 48 branches A+B, and 1 RS485 communication
AMC100-FT30	1 channel RS485 communication  and 30 channels temperature measurement
AMC100-FT48	1 channel RS485 communication  and 48 channels temperature measurement

AC into line

Instrument model		AMC100-ZA
Measurement parameters		Voltage, current, frequency, active power, reactive power, power factor, active energy, reactive energy, Zero-to-ground voltage, leakage current and zero sequence current, total harmonic content (THD), 2-63 harmonics, current and voltage unbalance, ambient temperature and humidity
Bus voltage	Rated	220VAC
	Measuring range	±20%
	Overload	Instantaneous voltage 2 times/sec
Current incoming circuit	Rated	Secondary 5A
	Range	0~6A
	Overload	Continuous 1.2 times, instantaneous 10 times/sec
Temperature and humidity	Temperature Range	-40ºC~+99ºC
	Humidity Range	20%~90%
Input frequency		AC45~65Hz
Measurement accuracy	Incoming line	Voltage/current level 0.2, active power/energy level 0.5, reactive power/energy level 1
	Temperature	±1ºC
	Humidity	±5%
Auxiliary power		AMC100-ZA: signal to take power (≤15W) AMC100-ZA-P220: 220V independent power supply AMC100-ZA-P24: DC 12-24V independent power supply
Environment	Temperature	Work: -20ºC~150ºC Storage: -25ºC~70ºC
	Humidity	Relative humidity≤93%
	elevation	≤2500m
Switch output		4 channels 3A 250VAC/3A 30VDC
Switch input		8 dry nodes
Communication		1 isolated RS485/Modbus-RTU to the background system 1 RS485/Modbus-RTU to touch screen  1 RS485/Modbus-RTU connection downstream module  Optional 1-channel Ethernet communication function
Installation Method		DIN35mm rail or bottom plate installation
Protection level		IP20
Pollution level		2
Security	Insulation	The insulation resistance between all terminals and the conductive parts of the shell is not less than 100MΩ
	Withstand voltage	A voltage and current signal//B voltage and current signal//switch output//isolated communication port//between other ports meet AC2kV 1min, switch input and other ports should meet AC0.5kV 1min, leakage current Should be less than 2mA, no breakdown or flashover phenomenon.

AC outlet

Instrument model		AMC100-FAK30	AMC100-FAK48
Measurement parameters		Voltage, current, frequency, active power, reactive power, power factor, active energy, reactive energy, 2-31 times total current harmonic content
Bus voltage	Rated	220VAC
	Measuring range	±20%
	Overload	Instantaneous voltage 2 times/sec
Current outlet loop	Rated	50mA
	Range	0.125~60mA
	Overload	Continuous 1.2 times, instantaneous 10 times/sec
Input frequency		AC45~65Hz
Measure	Outlet	Voltage/current/active power/active energy level 0.5, reactive power/reactive energy level 1
Auxiliary power		Powered by AMC100-ZA; DC 12-24V power supply when used alone
Environment	Temperature	Work: -15ºC~55ºC Storage: -25ºC~70ºC
	Humidity	Relative humidity≤93%
	elevation	≤2500m
Communication		RS485/Modbus-RTU
Installation Method		DIN35mm rail or bottom plate installation
Protection level		IP20
Pollution level		2
Security	Insulation	The insulation resistance between all terminals and the conductive parts of the shell is not less than 100MΩ
	Withstand voltage	The voltage and current signals of circuit A//the voltage and current signals of circuit B//other ports meet AC2kV for 1min, the leakage current should be less than 2mA, and there is no breakdown or flashover.

 

DC into line

Instrument model		AMC100-ZD
Measured parameters		Voltage, Current, Power, Electric energy, Ambient temperature and Humidity
Bus voltage	Rated	48VDC,240VDC,336VDC
	Measuring range	±20%
	Overload	Instantaneous voltage 2 times per second
Current incoming circuit	Rated	5V(Hall sensor, ±12V powered by AMC100-ZD)
	Overload	Duration is 1.2 times, instantaneous 10 times/second
Temperature and humidity	Temperature range	-40ºC~+99ºC
	Humidity range	20%~90%
Measuring accuracy	Coil in	Voltage/current level 0.5, power/electric energy level 1
	Temperature	±1ºC
	Humidity	±5%
Auxiliary  supply		AMC100-ZD:Signal power(≤15W) AMC100-ZD-P24:DC 12-24V independent power supply AMC100-ZD-P220: 1.When the constant voltage is DC 240V,DC336V,powered by AC220V,DC240V ,DC336V independent supply 2.When the constant voltage is DC 48V,powered by DC48V independent supply
Environment	Temperature	Operation:-15ºC~55ºC  Storage:-25ºC~70ºC
	Humidity	Relative humidity≤93%
	Altitude	≤2500m
Switching output		4-way 3A 250VAC /3A 30VDC
Switch input		8 dry nodes
Communication		1 channel isolated RS485/Modbus-RTU to the background system 1 RS485/Modbus-RTU to touch screen 1 RS485/Modbus-RTU connection to the downstream module 1-channel Ethernet communication function is optional
Installation		Method DIN35mm rail or bottom plate installation
Protection level		IP20
Pollution level		2
Security	Insulation	The insulation resistance between all terminals and the conductive parts on the shell must be at least 100MΩ
	Withstand voltage	Voltage and current signal of line A // Voltage and current signal of line B // Switching output // Isolated communication port // Two of other ports should meet AC2kV for 1min, switching input and other ports should meet AC0.5kV for 1min, leakage current should be less than 2mA, no breakdown or flashover phenomenon.

DC  outlet

Instrument model		AMC100-FDK30	AMC100-FDK48
Measuring parameters		Voltage, Current, Power, Electric energy
Bus voltage	Rated	48VDC,240VDC,336VDC
	Measuring range	±20%
	Overload	Instantaneous voltage 2 times per second
Current incoming circuit	Rated	5V (Hall sensor, need external power supply ±12V or ±15V)
	Range
	Overload	Duration is 1.2 times, instantaneous 10 times/second
Measuring accuracy	coil out	Voltage/current level 0.5, power/electric energy level 1
Auxiliary  supply		Powered by AMC100-ZD; DC 12-24V power supply when used alone
Environment	Temperature	Operation:-15ºC~55ºC  Storage:-25ºC~70ºC
	Humidity	Relative humidity≤93%
	Altitude	≤2500m
Communication		RS485/Modbus-RTU
Installation		Method DIN35mm rail or bottom plate installation
Protection level		IP20
Pollution level		2
Security	Insulation	The insulation resistance between all terminals and the conductive parts on the shell must be at least 100MΩ
	Withstand voltage	Voltage and current signal of line A // Voltage and current signal of line B // The two of other ports meet AC2kV for 1min, the leakage current should be less than 2mA, and no breakdown or flashover phenomenon.