After-sales Service: | Yes |
---|---|
Warranty: | 1 Years |
Display: | Digital |
Samples: |
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: |
![]() ![]() ![]() ![]() ![]() ![]() ![]() |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
Acrel ADL400 three phase din rail energy meter is an intelligent instrument designed mainly for electric energy statistics and management needs of power systems, industrial and mining enterprises, and public facilities. The product has the advantages of high precision, small size, and convenient installation.
Rated Current: 1 (6) A, 10 (80) A
Rated Voltage: AC220V/380V, AC230V/400V
RS485(MODBUS-RTU) Communication
12 digits LCD Display; 35mm DIN Rail Installation
Multi-tariff: 4 Tariff Rates (Spike, Peak, Valley and Flat kWh)
2~31st Harmonic Measurement
MID Certified
Set parameters
kWh Class 0.5S
High precision, CE and MID certification
Small size, light weight, easy to install
Diverse functions, full electric parameter measurement
Can realize wireless communication with the gateway module
Manage the electric demand of industrial and mining enterprises
Calculate the electricity consumption of the power supply system
Itemized measurement of electric energy in government agencies
Measurement of electrical energy in large public buildings
Voltage | Rated voltage | AC 220V | |
Rated frequency | 50Hz | ||
Consumption | <10VA | ||
Current | Maximum current | 80A | |
Starting current | 0.01A | ||
Consumption | <1VA | ||
Measurement performance | Accuracy | kWh Class 0.5 | |
Range | 0~9999999999.99kWh | ||
Clock | Accuracy | Error ≤0.5s/d | |
Active pulse | Width | 80±20ms | |
Constant | 1000imp/kWh,10000imp/kWh | ||
Communication | Interface | RS485 | |
Protocol | Mod bus-RTU | ||
Temperature range | Work | -25ºC~55ºC | |
Storage | -40ºC~70ºC | ||
Humidity | ≤95%(No condensation) | ||
Altitude | <2000m |
FAQ
Q:After the meter is powered on, the power or energy count is inaccurate.
A:Switch the meter display to the power (active power P, power factor λ) interface, and check whether the power display is negative or not. And whether the power factor is between 0.9-0.95, and then check whether the incoming and outgoing wires of the current signal wire are connected reversely (that is, the current The incoming wire must be the same as the incoming wire end of the instrument) and consistent with the wiring diagram on the instrument.
Q:The instrument cannot communicate with the host computer normally after power on.
A:1. The voltage value between the communication output A and B of the measuring instrument should be between +(4.4-4.5)V;
2. Check whether the communication wiring method is correctly wired in accordance with the wiring diagram requirements (that is, the communication terminal A/B of the corresponding to communication serial port A/B);
Suppliers with verified business licenses