Customization: | Available |
---|---|
Interface: | RS485 |
Application: | Telecom Base Station |
Still deciding? Get samples of $ !
Order Sample
|
Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
---|
Payment Methods: |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
---|---|
Support payments in USD |
Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
---|
Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
---|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
AMC200(L) energy meter is mainly used for full power measurement of multiple channels. It can access the current input of up to 8 AC three-phase or 24 AC single-phase channels at the same time, or 12 DC channels. It also supports the mixed use of three-phase and single-phase circuits. It can access AC current transformer or DC hall sensor, and each channel can be individually configured with the current ratio. It has RS485(Modbus-RTU) communication.
Channel: 8 channel 3 phase:
Rated Voltage: AC 3×220V/380V
Accurancy: Voltage and current level 0.5, active energy level 1
RS485(MODBUS-RTU)
Din Rail
AMC200 | AMC200L |
Meter Type |
Basic Function |
AMC200L-4E3 |
Can access 4 three-phase AC circuits at the same time, can directly measure the voltage, current, power, |
AMC200L-8E3 |
Can access 8 three-phase AC circuits at the same time, can directly measure the voltage, current, power, |
Technical Parameter |
Technical Indicator |
||
Input |
Frequency |
45~65Hz; |
|
|
Voltage |
Rating: AC 3×220V/380V; |
|
|
|
Overload: 1.2 times rated (continuous); 2 times rating value/1 second; |
|
|
|
Power consumption: ≤0.5VA (per channel); |
|
|
Current |
Rating: AC xxxA/50mA, need external transformer; |
|
|
|
Overload: 1.2 times rated (continuous); 10 times rating value /1 second; |
|
|
|
Power consumption: ≤0.5VA (per channel); |
|
Function
|
Pulse Output |
Output mode: open collector optocoupler pulse (default 400imp/kWh); |
|
|
Communication |
Modbus-RTU or YD/T 1363 protocol(use in China);Baud rate 1200~38400; |
|
|
Switch |
Input |
|
|
|
Output |
Output mode: relay normally open contact output; Contact capacity: AC 250V/3A or DC 30V/3A; |
|
NTC Temperature Measurement |
Temperature: -20~100ºC (accuracy ±2ºC); |
|
|
Temp&Humidity Measurement |
Temperature: -20~100ºC (accuracy ±2ºC); Humidity: 20-90%RH (accuracy ±5%RH) |
|
Measurement accuracy |
Frequency 0.05Hz, voltage and current 0.5 level, active power 1 level; |
||
Auxiliary power supply |
AC/DC 85 ~ 265V; Power consumption ≤10VA; |