MID Three Phase Smart RS485 Modbus RTU Energy Meter for PV Solar
|
Still deciding? Get samples of $ !
Order Sample
|
| Customization: | Available |
|---|---|
| After-sales Service: | Yes |
| Warranty: | 2 Years |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
360° Virtual Tour
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Find Similar Products
Basic Info.
- Model NO.
- ADL400
- Display
- Digital
- Installation
- Direct Connected
- Usage
- Multi-Functional Energy Meter, Watt-Hour Meter, Meter for Industry and Home Use, Standard Electric Energy Meter, Reactive Energy Meter, Multi-rate Watt-hour Meters, Maximum Demand Meter
- Electric Equipment
- Three-phase Four-wire
- Theory
- Static Meter
- Power Meter Connection
- Terminal
- Measured Signal
- Continuous Wave
- Type
- Energy Meter
- Certification
- RoHS, CE
- Customized
- Customized
- Phase
- Three Phase
- Accuracy
- 0.5s Grade
- Interface
- RS485, Infrared
- Protocol
- Modbus-RTU
- Transport Package
- Carton
- Specification
- ADL400
- Trademark
- Acrel
- Origin
- China
- HS Code
- 9028301400
- Production Capacity
- 200000
Packaging & Delivery
- Package Size
- 20.00cm * 15.00cm * 10.00cm
- Package Gross Weight
- 0.500kg
Product Description
MID Three-Phase Smart RS485 Modbus RTU Energy Meter for PV Solar
ADL400 din rail energy meter adopts DIN35mm din rail installation with LCD display, it can measure electric parameters and has energy pulse output, RS485 communication, which has the advantages of small size, high precision, good reliability, and convenient installation.
Q: After the meter is powered on, the power or energy count is inaccurate.
A: Switch the meter display to the power (active power P, power factor λ) interface, and check whether the power display is negative or not. And whether the power factor is between 0.9-0.95, and then check whether the incoming and outgoing wires of the current signal wire are connected reversely (that is, the current The incoming wire must be the same as the incoming wire end of the instrument) and consistent with the wiring diagram on the instrument.
Q: The instrument cannot communicate with the host computer normally after power on.
A:1. The voltage value between the communication output A and B of the measuring instrument should be between +(4.4-4.5)V;
2. Check whether the communication wiring method is correctly wired in accordance with the wiring diagram requirements (that is, the communication terminal A/B of the corresponding to communication serial port A/B)
|
|
| ADL | CE |
){kind=link}
Send your message to this supplier
People who viewed this also viewed
Product Groups
Find Similar Products By Category
- Supplier Homepage
- Products
- Energy Meter
- ALL METERS
- MID Three Phase Smart RS485 Modbus RTU Energy Meter for PV Solar