Amc16-Dett Base Station and Data Center Multi-Circuits DC Energy Meter

• Customization: Available
• Interface: RS485
• Protocol: Yd/T1363.3-2014
• Model NO.: AMC16-DETT
• Application: Telecom Tower
• Transport Package: Carton
• Specification: AMC16-DETT
• Trademark: Acrel
• Origin: China
• HS Code: 9028301400
• Production Capacity: 200000
• Package Size: 17.00cm * 15.00cm * 13.00cm
• Package Gross Weight: 0.500kg

Product Description

 

Product Description

Base station dedicated DC energy meter AMC16-DETT is specially designed for base stations where have sharing requirements, and switch power supply is without the function of sub-user metering.The meter could measure6 circuits DC energy, and supply working current to the matched hall sensors. Meanwhile, it can realize zero drift calibration by upper computer software.have the functions of telemetering,teleindication,teleadjusting, metering at real time,energy quality abnormal alarm, data storage and processing, data interaction.

Specification

Technical parameter		Index
input	DC rated voltage	1 channel: -48VDC
	DC current	6 channels hall sensors output is 5V,current ratio can be set  according to the actual ratio
	Commercial power monitoring	1 channel: 0-5VDC
	Overload capacity	Voltage:1.2times continued,2 times continued 1s;Current: 1.2 times continued,10 times continued 1s.
Accuracy (superposition hall sensors)		1%In≤I≤10%In error±2.5%; I>10%In error±2%
Measurement resolution		Voltage output accuracy 0.01V;    current output accuracy 0.01A;power output accuracy 0.01kw; energy output accuracy 0.01kwh.
functions	Basic function	Monitor device system time, total voltage, output total current, power, energy, each channel voltage, current, power, energy; LED indicator display;485 communication.
	Metering function	Start current: under rated voltage, when the load current value of the meter doesn't exceed 1% of the max. current, the meter starts.Shunt running current: when there is no current in the current circuit of the meter, and 85%-125%of the rated voltage is applied on the voltage circuit, the calculator shall not have more than one digital change.
	Alarm function	DC voltage output low alarm,DC voltage output high alarm,one power down alarm, module voltage loss alarm, metering branch error alarm, internal program error alarm, clock error alarm,memory failure alarm, AC input power failure alarm
	Timing function	support broadcast timing, could remote timing to the meter through RS485 communication.
	Communication	Single channel RS485, baudrate 9600bps, can be set to 1200BPS, 2400bps, 4800bps. Communication protocol: standard or custmized

		Hall sensor powersupply	Power supply output:+12V/100mA, -12V/50mA
		Clock accuracy	≤0.5S/d(23ºC), ≤1S/d(-20ºC-60ºC),
Auxiliary powersupply		Voltage range	-40V~-60VDC
		Power consumption	Whole device≤2W( no hall power supply output)
Storage			It has the storage function of historical power data and historicalalarm information, and the memory is 2MB
Insulation resistance			≥40MΩ
environment		Temperature	Working : -20ºC~+60ºC; storage:-40ºC~+70ºC
		Humidity	≤98% no condensation, no corrosive gas place
		Altitude	≤4000m
Protection level			IP20
Material flame retardent			Terminal glow wire temperature 960ºC±10ºC ,shell glow wiretemperature 650ºC±15ºC
installation			Standard 35mm din rail
Lightning protection	Voltage input(differential mode)		Peak value 5kA
	Auxiliary power supply(differential mode)		Peak value 5kA

Features of Multi Channels Digital Din Rail DC Power Meter for Telecom Tower Base Station

AMC16-DETT can measure the DC electric energy of the six circuits, and can provide the working current for the matching Hall sensor;
 

AMC16-DETT can monitor equipment system time, total voltage, total output current, total power, total electric energy, and voltage, current, power and electric energy of each branch;

AMC16-DETT can have alarm function, LED indicator light display, RS485 communication,and support broadcasting for calibration time.

 

Panel

 

Wiring

Recommend Hall Sensor

 

AHKC-EKA (50A/5V)

AHKC-EKB (100A/5V)

AHKC-K (200A/5V)

FAQ


Q:The measurement of the metering module is inaccurate.
A:Check input whether the polarity and direction of the input voltage and current wiring are correct;Whether the direction of the primary current of the Hall sensor is correct; Whether the output signal of the Hall sensor matches the input signal required by the module; Check whether the output negative pole of the voltage output Hall sensor is connected to the module GND.
 
Q:Communication is abnormal.
A:Check communication whether the communication cable is normal; check whether the communication terminals A and B are staggered; check whether the address of the module is set correctly and whether the communication baud rate is set correctly; if the communication of multiple modules is not normal, first try whether the single-machine communication is normal.
 
Q:The metering module cannot be displayed normally.
A:Check whether it is caused by insufficient load capacity due to the built-in power supply to the hall sensor. Change the external switching power supply to power the hall.
 

Networking

Certifications

 

Company Profile

Acrel Co., Ltd.[stock code: 300286.SZ] is a high-tech enterprise that integrates R&D, production, sales, and service, since its establishment, is committed to providing users with energy efficiency management and powerful security system solutions. Acrel Electric has a complete production line from cloud platform software to sensors.

Acrel energy efficiency management system including substation operations and maintenance cloud platform, electricity safety management cloud platform, Environmental equipment power consumption monitoring cloud platform, prepaid management (system) cloud platform, intelligent power distribution monitoring system, power quality management system, building energy consumption management system, industrial energy control platform, leakage power monitor and control system, fire-fighting device power monitoring system, fire-proof door monitoring system, emergency lighting and evacuation indicating system, EV charger management system, data center power&environment monitoring system, smart lighting control system, IT isolation power supply system and related products.

The company attaches great importance to product quality and innovation. By the end of 2018, the company has 5 trademarks, 18 invention patents, 72 utility model patents, 94 appearance patents, and 147 computer software Copyrights, and has participated in the formulation of national or industrial standards.