| Customization: | Available |
|---|---|
| After-sales Service: | Yes |
| Warranty: | 1 Years |
|
Still deciding? Get samples of US$ 14/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
AMC series AC multi-function panel meter is a smart meter designed for power monitoring needs of power systems, industrial and mining enterprises, utilities, and intelligent buildings, etc. It integrates measurement of power parameters, such as single-phase or three-phase current, voltage, active power, reactive power, apparent power, frequency, power factor.
High-brightness LED/LCD display interface, parameter setting, and control through buttons, ideal for real-time power monitoring systems. Can directly replace conventional power transmitters and measuring instruments. As an intelligent, digital front-end acquisition component, the instrument has been widely used in various control systems, SCADA systems, and energy management systems.
 |
|
|
| AMC48 | AMC72 | AMC96 |
|
|
|
| AMC48L | AMC72L | AMC96L |
| Technical Parameter | Value | |
| Input | Rated Value | AC voltage:Single phaseAC 100V,400V |
| Three phaseAC 100V,400V,660V(UL-L,Only 72/ 96) | ||
| AC current:AC1A,5A; | ||
| DC voltage:1000V,300V,75mV,10V; | ||
| DC current: 0-20mA,4-20mA,5A; | ||
| Overload | Voltage: 1.2 times rated value(continuous); 2 times rated value /1 second | |
| Current:1.2 times rated value(continuous); 10 times rated value /1 second | ||
| Frequency | 45Hz~65Hz | |
| Power Consumption | Power consumption of each voltage, the current input circuit is less than 0.5VA | |
| Accuracy | Class 0.5 | |
| Function | Display | LED or LCD |
| Communication | RS485, Modbus-RTU protocol;(1 start bit,8 data bit,1 stop bit,no parity) | |
| Baud Rate 2400/4800/9600/19200 bps etc. | ||
| Alarm | 1 channel passive relay,contact capacity 3A/30VDC,3A/250VAC, Used for high,low,unbalance alarm etc. | |
| Analog | DC4~20mA,( load <500Ω) | |
| (note: Shielded wire is specially selected for the above signal input and output) | ||
| Switching | Input:4 channel or 2 channel dry contact Input, built-in power supply | |
| Output:2 channel switching output,NO relay contact,capacity:3A/30VDC,3A/250VAC | ||
| Auxiliary Supply | AC/DC 85-265V | |
| Power Consumption | <5VA | |
| Insulation resistance | ≥ 100MΩ | |
| Power frequency withstand voltage | Between power supply set of terminals and signal input, output set of terminals 2kV/1min (RMS) | |
| Between the shell and all sets of terminals(except the set of terminals reference voltage less than 40V) AC 4kV | ||
| Environment | Temperature | Operation: -10ºC~+55ºCStorage: -25°C ~+70°C |
| Humidity | ≤95%RH, no condensation, without corrosive gas | |
| Altitude | ≤ 2500m | |
){kind=link}