Product Description
The prepaid energy meters support RF recharge (or card recharge) and remote recharge with many control modes, such as prepayment control and time control. The built-in 100A large capacity magnetic relay can realize internal switching and closing of the meter. It can also provide the dry contact output to control the external circuit breaker to achieve the trip function. It is widely used in pre-paid electricity management in commercial plazas, residential dormitories and school dormitories.
ADL300-EY Prepaid Energy Meter
AC 3×220/380V
1(6)A,10(80)A
Prepaid mode
Alarm for dump energy
Built-in Relay
Historical records
kWh Class 0.5S
DIN 35 mm
Technical parameter |
ADL300-EY |
Voltage |
Reference voltage |
3×220/380V |
Reference frequency |
50Hz |
Consumption |
<4VA(Each phase) |
Current |
Input current |
1(6)A ,10(80)A |
Starting current |
Connect directly: 0.004 Ib, connect via CT: 0.002In |
Consumption |
<4VA (Maximum current) |
Measurement performance |
Accuracy of measuring |
0.5s Class |
Clock accuracy |
Error ≤0.5s/d |
Active pulse |
Pulse width |
80ms±20ms |
Pulse constant |
6400imp/kWh,400 imp/kWh |
Communication |
Interface |
RS485(A+,B-) |
Connection mode |
Shielded twisted pair conductors |
Protocol |
MODBUS-RTU |
Mechanical performance |
Outline (Length × Width × Height) |
144mm×88mm×70mm |
Maximum wiring ability (flexible cable) |
25mm2 |
Work environment |
Work temperature |
-25ºC~55ºC |
Storage Temperature |
-40ºC~70ºC |
Relative humidity |
≤95%(No condensation) |
Altitude |
<2000m |
Front Panel
Wiring
ADL300-EY three phase prepaid energy meter is din rail type installation, three-phase power parameter measurement, and can support remote support and remote control, realize the load power tie breakers and can see the brand LOGO on the front panel, infrared interface, the pulse light, switch points switching state, LCD display, rated current voltage parameters, as well as the page to check the function button.
Network
Photos on Site
Company Profile