| Customization: | Available |
|---|---|
| Interface: | RS485 |
| Protocol: | Modbus-RTU |
|
Still deciding? Get samples of US$ 98/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment methods: |
|
|---|---|
| Support payment in USD |
| Secure payments: | Every payment you make at Made-in-china.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
DTSD1352-4S DIN-rail Type Multi-circuit Power Meter for Base Station
Model:DTSD1352-4S
Frequency:45~65Hz
Voltage:Rated value: AC 3×220V/380V
Current:Rated value: Secondary input rated current:50mA
Measurement Accuracy:Frequency: 0.05Hz, voltage and current: 0.5 class, active energy: 1 class, reactive energy: 2 class; 2nd to 31st harmonic accuracy: ±1%
Power frequency withstand voltage:>AC 2kV/1min
Insulation resistance:Input and output terminals to the chassis >100MΩ;
DTSD1352-4S series DIN-rail type multi-circuit power meter is mainly used for the full electric parameter measurement of multiple circuits, and can be connected to the current input of 4 three-phase circuits or 12 single-phase circuits at the same time. It can measure parameters such as voltage and current, power, power factor, phase angle, unbalance, and harmonics.
| Auxiliary power | AC/DC 85~265V; Consumption≤10VA; | |
|
Input
|
Frequency | 45~65Hz; |
|
Voltage |
AC 3×220V/380V; Overload: 1.2 times of rated value (continuous); 2 times of rated value / 1s; Power consumption: ≤ 0.5VA;each channel) |
|
|
Current |
Rated value: Secondary input rated current:50mA;Overload: 1.2 times rated value (continuous); 10 times rated value/1 second;power consumption: ≤ 0.5VA(each channel); |
|
|
Measurement accuracy |
Frequency: 0.05Hz, voltage and current: 0.5 class, active energy: 1 class, reactive energy: 2 class; 2nd to 31st harmonic accuracy: ±1%; |
|
|
Features |
Pulse output | Output method: optocoupler pulse with open collector,the pulse constant defaults to 400imp/kWh (and active open input can only be either-or.); |
| Communication | RS485 interface, Modbus-RTU protocol; baud rate 1200~38400; | |
| Switching Input | 2-way or 4-way passive dry contact input, built-in power supply; 2-way active wet node input (AC220V), identify the oil generator and mainsaccess (and pulse output can only be either-or.); |
|
| Switching Output |
Output method: relay normally open contact output; |
|
3-Phase 3-Wire Power Wiring
3-Phase 4-Wire Power Wiring
1. 4-way three-phase or 12-way single-phase loop full electric parameter measurement, external current transformer;
2. Monitoring each phase voltage/current, zero sequence current, frequency;
3. Monitoring each phase power and total power (active, reactive, apparent);
4. Monitoring each phase power factor and total power factor;
5. Monitoring voltage/current phase angle, voltage/current unbalance;
6. Monitoring total voltage/current harmonics and 2nd to 31th harmonics;
7. Recording voltage, current and power extreme value of the current month and the previous month;
8. Maximum current, maximum power demand and real-time current, real-time power demand;200 event loggings to record the actions of DIDO;
9. Supporting overvoltage, overcurrent, phase failure, DI linkage and other alarm output;
10. Rate setting for 4 time zones and 14 time periods;Four-quadrant energy, 12-month multi-rate energy statistics;
11. 31-day four-quadrant and multi-rate energy freeze, forward and reverse energy metering;
12. Four passive switch inputs, two active switch inputs, one switch output, RS485 communication;
13. Two-way passive switch input, two-way switch output, RS485 communication;
Note: It can only choose either-or between four passive switch inputs, two active switch inputs, one switch output and two passive switch inputs, two switch outputs.
){kind=link}